Problem:

Using diesel, kerosene, or diluents as a release agent can cause voids, potholes, and premature degradation when dropped on fresh mat. These products also cause problems related to fumes, odors, and airborne emissions. To make things more difficult, many State departments of transportation prohibit use of release agent solvents that strip asphalt.

StormClean Products are the Solution!

Truck Beds: Slick Release

Slick Release is a biodegradable, water-based asphalt release agent that puts a slip coating on floors, walls and tailgates of asphalt hauling trucks. Slick Release does the same job as diesel, but is biodegradable and contains no petroleum solvents. It can be easily cleaned by rinsing with water.

Slick Release has been proven effective on all types of asphalt including polymer asphalt. When using on polymer asphalt, simply use a lower dilution ratio. This product will not affect the mix of the asphalt and can be easily cleaned by rinsing with water. Slick Release replaces the need for diesel at basically 1/2 the cost!

Slick Release can be used in both foamers and sprayers. When used through a foamer, set at 20:1 with air pressure of 30-75 psi. For use in a hand-held sprayer, dilute the product from 8-15:1. Apply a layer of Slick Release to truck floors, walls, and tailgates to keep your truck beds clean.

Tools and Equipment: Slick Asphalt Release

Slick Asphalt Release is an industrial strength, solvent-based asphalt cleaner and remover that quickly dissolves asphalt, tar and similar materials on equipment. Apply it with a sprayer, brush, or mop then simply rinse with water.

A Natural Cleaner: Bio Clean

Based on a citrus compound, Bio Clean is your best choice when a biodegradable remover is required. Bio Cleans ready-to-use formula is the most effective asphalt cleaner and remover for quickly dissolving asphalt, tar and similar materials on equipment. Whether you apply it with a sprayer, brush or mop, Bio Clean rinses away easily with water and leaves no residue.